Versalis SAN products

Fournier Polymers presents the Eni Versalis SAN (styrene-acrylonitrile) products.

This family of styrenes is commonly used for applications such as transparent sheets, refrigerators, cosmetic packaging and masterbatches.

Versalis SAN products

SAN with Kostil®

Eni Versalis markets its SAN products using the Kostil® brand.

SAN with Kostil®

KOSTIL® B 266 has excellent chemical resistance and a very low residual monomer content. It is characterised by its high clarity and its good mechanical properties. It is suitable for extrusion and injection moulding. Injection moulding is a typical process, with pre-drying for one to two hours at 80°C in an air circulating oven, a melting point of 200°C to 250°C and a mould temperature of 40°C to 75°C.

KOSTIL® B 366 has good chemical resistance, a very low residual monomer content and a high level of clarity. It is designed for moulding items with complex shapes and/or thin walls in fast cycles. Injection moulding is a typical process, with pre-drying for one to two hours at 80°C in an air circulating oven, a melting point of 190°C to 250°C and a mould temperature of 40°C to 75°C.

KOSTIL® B 755 has a very high flow and is designed for compounding applications. It is particularly recommended for masterbatches.